Energy audit for fab drying

Thu, 23 Jul 2026 11:52:57 +0800

Why Semiconductor Fabs are ditching ovens for IR Curing

If you’ve spent any time in a fab lately, you’ve probably noticed something. Those big, clunky convection ovens are starting to disappear. People are moving toward infrared (IR) curing instead. Why? Because heating up an entire room just to dry a tiny piece of silicon is kind of a waste. IR goes straight for the substrate. It’s the reason why “eco-friendly” or “lead-free” specs almost always point toward IR these days. The physics of it is actually pretty simple. Think about a convection oven. You’re heating air, which then heats the walls, which then—eventually—heats your part. You need massive blowers to keep it moving, and you lose a ton of energy through the walls. IR is different. It uses electromagnetic radiation. The energy jumps straight into the photoresist or the adhesive. It’s fast. Really fast. And if you use short-wave IR, it actually sinks deeper into the material. That means you can cure those thicker layers without accidentally scorching the surface. Keeping things clean (and lead-free) Dealing with lead-free solders and polymers is a bit of a tightrope walk. If you overshoot your temperature by even a little bit, you’re looking at warped wafers or annoying voids. That’s where closed-loop PID controllers come in. They work with the IR lamps to hit a specific temperature and stay there. Plus, it’s just a cleaner way to work. No solvent-based mediums, no ozone-generating elements, and no combustion. It’s just electricity turning into photons. Simple. The catch Now, you can’t just rip out your oven and plug in an IR array and expect it to work perfectly. The heat density is way higher. If your layout is even slightly off, you’ll get hot spots that warp your wafers. You have to be obsessive about focal distances and use reflective shielding so you don’t accidentally cook your machine frame. One last tip: check your power draw. Switching to IR usually cuts your energy bill by 30% to 50%, which is great. But keep in mind that your electrical panels need to be able to handle those initial spikes when the lamps first kick on.

Audit on Extra Performance IR Heating

Energy audit for fab drying

Why Semiconductor Fabs are ditching ovens for IR Curing